Frankenstein Bride Patch

Description

4″ wide x 5″ high

To Apply Patches:

Garment should be clean & freshly laundered (including new items)

For best results, sew it on

Otherwise, Iron

(but do not iron on un-ironable fabrics (low melting point) such as nylons, vinyls, or leathers

• Home Iron:
  • • Set iron to high COTTON setting for 5 minutes before
    • No Steam
    • Thoroughly iron area of garment where patch is going to go
    • Place patch on garment embroidery face up
    • Cover patch with a thin cloth
    • Iron 30 seconds using constant pressure and a twisting motion
    • Repeat on reverse side of fabric
    • Let cool, if you can lift the edge of the patch, repeat previous step
• Professional Heat Press:
  • • 300 degrees
    • Dwell time 10-15 seconds
    • Times and temperatures may change depending on the material the patch is being applied to
• Patches may also be sewn on or applied with an embroidery machine

To Launder Patches on a Garment:

• Wash in cool water
• Mild detergent
• No bleach additives/no bleach at all
• Dry garment promptly
• Do not allow garment to sit wet